This weekend I was able to pick up this pile of new bits for the wagon. Bright & early Sunday morning I dug the xB & my little utility trailer out of the snow and headed to CT. There I met up with a gentleman who was rebuilding his wife’s 1966 Mustang and was upgrading it to a newer Thunderbird 3.8 V6 & 5-speed. I was able to buy the original 200ci six, C4 transmission, driveshaft and a box of parts & accessories for only $250.

In addition to not having a bad valve, the motor has only 77K miles on it, and allows me to in the same package get a 60 amp alternator(instead of my 30amp generator), automatic choke, and a carb that isn’t leaking gasoline. It does need an exhaust manifold as these are prone to cracking, however the one on my old motor is good. Also the distributor bushings are worn so it slowly goes out of tune. I’ll be trying my distributor, and if that doesn’t work a remanufactured replacement is only $50.

I’m planning to stab the motor in as soon as possible, but the transmission is going to have to wait until at least the spring as going from the 2-speed Fordomatic in the wagon the 3-speed C4 requires a bit more adapting (new driveshaft, transmission crossmember and custom linkage).

Not sure when I’m going to get a chance to swap the motors, so until then everything is sitting wrapped in a tarp on the trailer. This is the joy of trying to get stuff done on a car in New England without a garage. You never know when your work area is going to be under several inches of snow.